Switching the angle displaying the angle mark, Displaying the angle mark, Switching the angle – Pioneer BDP-121 User Manual

Page 34

Advertising
background image

Playback Functions

Displaying the Angle Mark

You can change settings so that Angle Mark appears
in the right bottom part of the screen when multiple
angles are recorded. (The Angle Mark is displayed
for BD/DVD video.) The settings can be changed in
“Settings” - “Playback Setting” - “Angle Mark Display”
(Page 39).

NOTE

Settings for audio and subtitles can be changed also in
Function Control Screen (Page 34).
The operations of subtitles, angle and audio differ
according to each disc. You may need to refer to the
operation manual of the disc.
The following operations will not work when playing back
an audio CD:
Slow Playback, Frame Advance

Display of functions

The display for subtitles, angle or audio automatically
disappears after 5 seconds.

Switching between functions

You can switch the subtitles and audio at the Function
Control screen (Page 34).
The operation for each function varies depending on the
disc. See the manual for the disc.

Fast Forward/Reverse

You cannot perform Fast Forward/Fast Reverse between
titles. At the end or beginning of the title, Fast Forward/
Fast Reverse will be cancelled and normal playback will
automatically resume.
Subtitles are not played back with BD/DVD video discs
during Fast Forward and Fast Reverse.

Slow Playback

You cannot perform Slow Playback between titles. At the
end of the title, Slow Playback will be cancelled and normal
playback will automatically resume.

Repeat Playback

Repeat Playback may be forbidden depending on the disc.
Partial Repeat Playback may not work in multi-angle
scenes.
For Partial Repeat Playback, set the start and end points
within the same title.


Switching the Angle

If multiple angles are recorded, you can switch
between them.

Press

ANGLE during playback.

The display indicates the angle number currently being
played back. Each time you press

ANGLE, the angle

switches.
“–” is displayed if a disc is recorded with only one
angle.

1

To return to the previous angle, press

ANGLE to cycle

through the angles until you return to the original angle.

1

32

Advertising