7-3 data header, 7-4 compass – NorthStar Navigation Multi-Function Unit M84 User Manual

Page 19

Advertising
background image

Northstar M121/M84 Installation and Operation Manual

18

2-7-3 Data header

The displays can show data at the top, called
the data header.

When you select a window from the display
menu (see section 2-7) the M121/M84
displays an appropriate data header for the
window.

Each favorite display (see section 2-7-2) has
its own data header. When you press

to recall a favorite display, the M121/M84
recalls the favorite displays data header.

Setting the data header for a display

1 Press

DISPLAY

and select Data header.

2 To turn the data header on or off:

i Select Data.

ii Select or .

3 To select the size of the data:

i Select Size.

ii Select the size to display.

4 To change the data displayed:

i Select Data setup.

ii Change a data field:

a Press the cursor keys to highlight
the

field.

b

Press

ENTER

to display a menu

of data items.

c Select a data item that is available
on your system or select None to
leave the field empty.

iii Repeat the above step to set the other
data

fields.

Tip: If all fields in a line are None then the

line will not be displayed and the data header
will take less space on the display.

5 Press

ESC

.

Tip: The data header will change when you

select another display. To set a data header that
you can recall later, set the header as part of a
favorites display (see below).

Favorites displays and data headers

To set a data header for a favorites display,
follow the steps to add a favorite (see section
2-7-2 - Adding a favorite display to the list). In
step 1, set the data header for the favorite as
described above.

2-7-4 Compass

The chart, sonar and highway displays can show
a compass at the top of the window.

The compass always shows the boat’s course
over ground (COG), a black symbol in the
middle. When the boat is navigating to a
point, the compass also shows bearing to the
destination (BRG), a red symbol.

In this example, BRG is 260°M and COG is 321°M.

To turn the compass off or on:

1 Press

MENU

and select Data header.

2 Set

Compass

to or .

Advertising
This manual is related to the following products: