NorthStar Navigation Multi-Function Unit M84 - Manual (Page 90)

Northstar M121/M84 Installation and Operation Manual 89
20 Installation
! WARNING
Ensure that any holes cut are in a safe position and will not weaken the boat’s structure. If in
doubt, consult a qualified boat builder.
CAUTION
Do not mount any part where it can be used as a hand hold, where it might be submerged or
where it will interfere with the operation, launching or retrieving of the boat.
To help ensure proper operation, do not mount any part or cable within 0.5 m (20”) of the plane
of a radar antenna or within 1 m (3 ft) of a compass or source of electrical noise, such as engines,
fluorescent lights, and power inverters.
When fitting a cable, do not crush or strain the cable. Secure the cable at regular intervals. Ensure
no connectors or exposed terminals are in wet area.
If the cables supplied are too long, do not shorten the cable; instead coil the cable. Most cables
can be extended with Northstar extension cables. Do not fit more than one extension cable.