NETGEAR 108 MBPS WIRELESS WGT624 V3 User Manual
Page 31
Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v3
Configuring the Internet and Wireless Settings
3-9
202-10090-02 v 1.4, July 2005
Usually, select Use Default MAC Address.
If your ISP requires MAC authentication, then select either Use Computer MAC address to
disguise the Router's MAC address with the Computer's own MAC address or Use This MAC
Address to manually type the MAC address for a different computer. The format for the MAC
address is XX:XX:XX:XX:XX:XX. This value may be changed if the Use Computer MAC
Address is selected once a value has already been set in the Use This MAC Address selection.
Click Test to connect to the NETGEAR Web site. If you connect successfully, your settings work
and you may click Logout to exit these pages and... enjoy surfing the 'net!
If you don't connect successfully,
1.
Go through the settings and make sure you've selected the correct options and typed
everything correctly.
2.
Contact your ISP to verify the configuration information.
3.
Read the Troubleshooting section in the Router Installation Guide.
4.
On the Router GearBox CD, read the Troubleshooting Guide or the Troubleshooting section in
the Reference Manual.
5.
Contact NETGEAR Technical Support.