NETGEAR 108 MBPS WIRELESS WGT624 V3 - Manual (Page 38)

Reference Manual for the 108 Mbps Wireless Firewall Router WGT624 v3
4-4 Content Filtering
202-10090-02 v 1.4, July 2005
Enter the Starting Port and Ending Port numbers. If the application uses a single port number, enter
that number in both boxes.
If you know that the application uses either TCP or UDP, select the appropriate protocol. If you are
not sure, select Both.
• Configuring Services Blocking by IP Address Range
Under “Filter Services For”, you can block the specified service for a single PC, a range of PCs
(having consecutive IP addresses), or all PCs on your network.
Scheduling When Blocking Will Be Enforced
The WGT624 v3 wireless router allows you to specify when blocking will be enforced. The
Schedule menu is shown below:
Figure 4-4: Schedule menu
Use this check boxes on this menu to create a schedule for blocking content. Click Apply.
• Days to Block. Select days to block by checking the appropriate boxes. Select Everyday to
check the boxes for all days. Click Apply.