Vlan configuration menu, Vlan configuration menu -22, Vlan configuration – Nortel Networks 450 User Manual
Page 154: Menu
Using the BayStack 450 10/100/1000 Series Switch
3-22
302401-D Rev 00
VLAN Configuration Menu
The VLAN Configuration Menu screen (
) allows you to select the
appropriate screen to configure up to 64 port-based VLANs. When you create
VLANs, you can assign various ports (and therefore the devices attached to these
ports) to different broadcast domains. Creating VLANs increases network
flexibility by allowing you to reassign devices to accommodate network moves,
additions, and changes, eliminating the need to change physical cabling.
See “
for detailed information
about configuring VLANs.
Choose VLAN Configuration (or press v) from the Switch Configuration Menu
screen to open the VLAN Configuration Menu.
Port Mirroring Address A
Only appears when you select any of the five
address-based monitoring
modes from the Port Mirroring Configuration screen. When you enter a MAC
address in this field, it is also configured into the Port Mirroring Configuration
screen. Conversely, when you enter the MAC address from the Port Mirroring
Configuration screen, it also displays in this screen. See “
for more information.
Default Value
00-00-00-00-00-00 (no MAC address assigned)
Range
00-00-00-00-00-00 to FF-FF-FF-FF-FF-FF
Port Mirroring Address B
Only appears when you select any of the two
address-based monitoring
modes that use Address B from the Port Mirroring Configuration screen.
When you enter a MAC address in this field, it is also configured into the Port
Mirroring Configuration screen. Conversely, when you enter the MAC
address from the Port Mirroring Configuration screen, it also displays in this
screen. See “
” on
for more
information.
Default Value
00-00-00-00-00-00 (no MAC address assigned)
Range
00-00-00-00-00-00 to FF-FF-FF-FF-FF-FF
Table 3-6.
MAC Address Table Screen Fields
(continued)
Field
Description
kombk.book Page 22 Tuesday, June 29, 1999 3:25 PM