Nortel Networks 450 - Manual (Page 262)

Using the BayStack 450 10/100/1000 Series Switch
D-2 302401-D Rev 00
Configuring 802.1Q VLANs
To create or modify an 802.1Q VLAN, follow the flowcharts in
Figures
D-1 and D-2 ).
Choose VLAN Configuration (or press v) from the VLAN Configuration Menu
screen to open the VLAN Configuration screen.
Figure D-1. Configuring 802.1Q VLANs (1 of 2)
Yes
Yes
No
No
VLAN Configuration screen
Select the appropriate value
for the Create VLAN field.
Press [Ctrl]-R to return
to previous menu.
Set the Port field,
as appropriate
for your configuration.
Set PVID.
BS45047B
Choose VLAN Port
Configuration (or press c)
to open the VLAN Port
Configuration screen.
VLAN
Port members
Configured?
Is PVID
correct?
Configure Port Members as Tagged Port
Member, Untagged Port Member,
or Not a Member of VLAN (see "VLAN
Configuration Rules" for more information).
2
1
Off-page reference
On-page reference
Key
kombk.book Page 2 Tuesday, June 29, 1999 3:25 PM