Introduction, 1. features – NEC MM2000 User Manual

Page 10

Advertising
background image

2

1-1. Features

• 3D Motion Adaptive I/P Conversion Supports a Multi-directional Filter for HDTV

Differing from the conventional 3D Motion Adaptive interpolation method, this provides optimum interpolation even in oblique

directions of the moving image. Therefore, image quality performance of image contents are drawn out to the maximum limit

when converting to progressive signals.

Because from the beginning there are 3:2 and 2:2 pull down signals for the image contents, to be compatible to animation

formats, bad editing signals and super-imposed scroll signals, there is no feeling of incongruity such as in scene changes. This

makes it possible to enjoy the contents more.

• Full 10-bit Image Processing Circuit

There is color 10-bit image processing circuits from the slot interface to the output unit. When inputting signals from the optional

SDI interface slot, there is complete 10-bit processing up to the interface unit of the projector. This makes it possible to attain

images with high-bit depth.

• Per-pixel Motion Adaptive Noise Reduction

When the SDTV signal is input, it is possible to cancel out noise without blurring the contours of the image by detecting the

noise component in the input image on one pixel basis. The “residual images” in which images flow behind the moving objects

will not occur by processing to correspond to the motions in the input image.

• Equipped with 4 slots which can accommodate 4 types of interface boards

This Switcher is equipped with 4 slots which permit the insertion of the following 4 types of optional interface boards. Multiple

interface boards of the same type can also be inserted.

Connectors of the Various Boards

MM-VIDEO* ...... CVBS input connector (BNC), S-Video input connector (BNC 2 conductors), Component video

input connector (BNC 3 conductors)

MM-RGB* ......... RGB input connector (BNC 5 conductors)

MM-SDI ............ SDI input connector (BNC)x2, monitor output connector (BNC)

MM-DVI ............ DVI-D input connector (DVI-D 24 pin)

* When shipped from the factory this Switcher is installed with one MM-VIDEO board and one MM-RGB board.

1.

Introduction

Advertising