NETGEAR FS518T User Manual
Page 18
physical description 2-5
Table 2- 1 describes each LED on the front panel of the Model FS518T switch.
Table 2-1. LED Descriptions
Color
Activity
Description
Green
On
Power is supplied to the switch.
Off
Power is disconnected.
Green
Blinking
Packet transmission or reception is occurring on
the port. The blinking action corresponds to the
number of packets that are transmitted or received.
Off
No packet transmission or reception is
occurring on the port.
Green
On
A full-duplex link is established on the port.
Yellow
On
A half-duplex link is established on the
port, and the port is experiencing collisions.
(Note that occasional collisions are normal.)
Off
No full-duplex link is established, or no collisions
are occurring on the port when operating in
half-duplex mode.
Green
On
A valid 100 Mbps link is established on the port.
Off
No 100 Mbps link is established on the port.
Green
On
A valid 10 Mbps link is established on the port.
Off
No 10 Mbps link is established on the port.
Green
On
A valid 1000 Mbps link is established on the port.
Off
No 1000 Mbps link is established on the port.
Green
On
A valid 100 Mbps link is established on the port.
Off
No 100 Mbps link is established on the port.
Label
Power
Rx/Tx
FDX/COL
100M Link (located
at the top left corner
each 10/100 Mbps
UTP port)
10M Link (located at
the top right corner
of each 10/100 Mbps
UTP port)
1000M Link (located
at the top left corner of
each 100/1000 Mbps
UTP port)
100M Link (located at
the top right corner of
each 100/1000 Mbps
UTP port)
FS518T.Manual.FINAL 5/19/00 12:55 PM Page 19