Numark Industries CDN-88 - Manual (Page 10)

CDN-88 Dual CD Player
- The Leader in DJ Technology
©2000 Numark Industries - 10 - http://www.numark.com
MOVING LOOP POINTS
The “LOOP IN” point can be moved while the music is playing just by pressing at the new desired point. The next time “LOOP OUT” is
reached the CD will return to this new “LOOP IN” point. If “LOOP IN” is press after the “LOOP OUT” point it will clear the “LOOP OUT” point
The “LOOP IN” point can also be edited while
paused. First hold down then press
to move to the loop in point. Next
rotate the wheel to search for a new cue point
and then press again to set the new
point. Check your point by pressing .
The “LOOP OUT” point can also be moved while a
loop is playing. Press to release the old
“LOOP OUT” point and pressing it again at the new
desired point.
RELOOP/STUTTER: This button performs 2 different functions depending on loop setting.
Reloop is only possible if “LOOP” points have been previously set. The “RELOOP” function automatically returns the music to the “LOOP IN” point
and will play the loop until it is released with the “LOOP OUT” button.
Stutter starts instant play from previously set “Hot” points. Simply set your stutter (Hot Start) point by follow the directions for setting loop in because
the points are the same. Remember the button serves also for the reloop function so if a loop out has been set the unit will also loop until
released. This function lets you set 3 Hot Start points. The first is based on the “PLAY” cue point and the second two are based upon “LOOP IN”.
Since the default “LOOP IN” points are also the initial start point your unit can be “stutter” started from up to 3 buttons.
NOTE: The CD Player will always remember a new set “Hot” points until you actually set a new “LOOP IN” point or put in a new CD. The
new point will be accessible until you remove the CD from the unit. If you change tracks and you previously set a “Loop In” on another
track, pressing will jump to that point.