Specifications – Numark Industries CDN-88 User Manual

Page 15

Advertising
background image

CDN-88 Dual CD Player

- The Leader in DJ Technology

©2000 Numark Industries

- 15 -

http://www.numark.com

PROGRAM FUNCTIONS

This button provides several programmable functions depending upon the combination of buttons used.

Track Sequence Program - Depress

while the unit is stopped and the program indicator will light. Select each track to be

programmed

and press

between selections. Press

to start the track program. To exit and erase program hold

for more than 2 seconds while the unit is stopped, open the disc tray, or turn off the power.

End of track dead space elimination – holding down

and pressing

will show and option for eliminating the dead space at the

end of tracks. This is useful if you are playing a CD continuously and want to eliminate the gaps between songs. The unit will startup with

this in the off position. The display will indicate “0 space” when the function is set to eliminate space. Setting this function on one side will
affect both sides. This way you can enable the function while CD 1 is playing by using CD 2.

Relay time - holding down

and pressing

will show options for the amount of time used for relaying between tracks. Options will

appear to relay immediately after the track (0), with time added of 1,2,or 3 seconds(1,2,3), or a reduction of 1,2, or 3 seconds (-1,-2,-3). By
reducing time the tracks will crossover before the end of a track, creating an automatic segue from master to slave. This feature will also

work in track sequence program mode; however, if the sides are also in SINGLE mode the same number of tracks programmed should be
the same. Play will stop at the end of the last track.
Setting this function on one side will affect both sides. This way you can enable the

function while CD 1 is playing by using CD 2.

FREE WHEEL CUE – holding down

followed by

will alternate the jog wheel between free wheel and non free wheel mode during

cue operations. The sound during wheel rotation can be adjusted from a smooth “scratch” sound to the tradition “stutter” sound. The
display will indicate FREE WHEEL when the “scratch” sound is active. This indication will go away when the style of cue is stutter. This

setting will be remembered at power down.

Automatic door close protection – holding down

followed by

will adjust this option. The display will indicate 30 seconds, 60

seconds, 120 seconds, and (--) for no auto close. This setting will be remembered at power down. Setting this function on one side will
affect both sides. This way you can enable the function while CD 1 is playing by using CD 2.

Digital Output – In order for the digital output to work the output must be turned on. To turn this on holding down

followed by

.

When this is active digital out will turn on and all pitch and loop functions will disengage.

Smart Looping

-

To active smart looping hold down

followed by

at the same time. After this has been done all loop points and

stuttering will follow the beat of the music.

SPECIFICATIONS

TECHNICAL:

Quantization

16-bit linear/channel, 3 beam laser

Oversampling rate

8 times

Frequency response

20Hz-20KHz

Channel separation

86dB

T.H.D. + NOISE

0.01%

S/N ratio (IHF-A)

94dB

Output level

2.0Vrms

Short access time
(Play next track)

less than 1.7sec

Long access time
(Track 1 ->Track 20)

less than 3sec

Digital Output

type 2, form 1, S/PDIF

(Sony/Phillips Digital Interface Format)

GENERAL:
Environmental:
Operating Temperature

5-35 deg. C

Humidity

25 to 85% RH (non-condensing)

Storage Temperature

-20 to 60 deg. C

Dimensions:
Main Unit:

482(W) x 88.8(H) x 264(D) mm (without feet)
19(W) x 3 1/2(H) x 10 3/8(D) inches (without feet)

Control Unit: 482(W) x 88.8(H) x 74(D) mm (without feet)

19(W) x 3 1/2(H) x 2 7/8(D) inches (without feet)

Weight:

Player Unit:

5 Kgs., 11 lbs.

Control Unit:

2 Kgs., 4.4 lbs.

Power Supply:

115/230V AC, 50/60Hz

Power Consumption:

25W

Advertising