Basic requirements for dial-in, How to configure dial-in, Basic requirements for dial-in -5 – NETGEAR Cable/DSL ProSafe Firewall FR328S User Manual
Page 43: How to configure dial-in -5
Advertising
FR328S ProSafe Firewall with Dial Back-Up Reference Manual v2
Serial Port Configuration
4-5
M-10207-01, Reference Manual v2
Basic Requirements for Dial-in
Dial-in requires these elements:
1.
A broadband connection to the FR328S.
2.
An analog phone line.
3.
A serial modem properly configured and attached to the DB9 connector on the serial port.
4.
The Dial-in settings configured and applied to the FR328S.
How to Configure Dial-in
Follow the steps below to configure a serial port dial-in connection.
1.
Configure a serial port modem according to the instructions above.
2.
From the Serial Port section of the main menu, click Dial-in.
Figure 4-3: Serial Port Dial-in settings screen
3.
Configure the Dial-in settings.
4.
Click Apply for the changes to take effect.
Advertising