Nexgrill 720-0140-LP - Manual (Page 24)

GAS HOOK-UP
valve, hand tighten the nut clockwise to a
complete stop. Do not use a wrench to
tighten. Use of a wrench may damage the
quick coupling nut and result in a hazardous
condition.
6. Open the tank valve fully
(counterclockwise). Use a soapy water
solution to check all connections for leaks
before attempting to light the grill, see
below. If a leak is found, turn the tank valve
off and do not use the grill until a local L.P.
gas dealer can make repairs.
To disconnect L.P. gas cylinder:
1. Turn the burner valves off.
2. Turn the tank valve off fully (turn
clockwise to stop).
3. Detach the regulator assembly from the
tank valve by turning the quick coupling
nut counterclockwise.
22