NETGEAR MBR624GU - Manual (Page 38)

3G Broadband Wireless Router MBR624GU User Manual
2-10 Wireless Network Configuration
v1.0, January 2009
Configuring WEP
To configure WEP data encryption:
1. Log in to the router at its default LAN address of http://192.168.0.1 with its default user name
of admin, and default password of password, or using whatever user name, password, and
LAN address you have chosen for the router.
2. From the main menu, select Wireless Settings to display the Wireless Settings screen.
3. In the Security Options section, select the WEP (Wired Equivalent Privacy) radio button:
4. Select the Authentication Type: Automatic, Open System, or Shared Key. The default is
Open System.
5. Select the Encryption Strength setting:
• WEP (Wired Equivalent Privacy) 64-bit encryption. Enter 10 hexadecimal digits (any
combination of 0–9, a–f, or A–F).
Note: If you use a wireless computer to configure wireless security settings, you will be
disconnected when you click Apply. Reconfigure your wireless computer to match
the new settings, or access the router from a wired computer to make further
changes.
Figure 2-5
Note: The authentication scheme is separate from the data encryption. You can select
an authentication scheme that requires a shared key but still leaves the data
transmissions unencrypted. If you require strong security, use both the Shared
Key and WEP encryption settings.