Numark Industries CDN90 - Manual (Page 10)

CDN90
SETTING CUE POINTS
PLAY and CUE: Pressing the “PLAY” button starts the disc. Pressing the “CUE” button will reset the disc to the last place where the
disc was started. This is called the cue point. By alternately pressing the “PLAY” button and the “CUE” button, the disc
may be returned and played from the cue point any number of times. This function is called back cue.
PLAY, PAUSE and CUE: Pressing “Play” to start then pressing “Pause” and then “Play” again, a new cue point will be set. Pressing
“Cue” will return to the last pause position and will be the new cue point.
EDITING CUE POINT: When the jog wheel is turned while paused, a new cue point can be located. By pressing “PLAY” while
paused that point will be set. By pressing “PLAY” again (STUTTER) the point can be checked as desirable.
- The Leader in DJ Technology
©2002 Numark Industries - 10 - http://www.numark.com