Numark Industries CDN90 - Manual (Page 8)

CDN90
DISPLAY FEATURES
1. PLAY - Active while the unit is actually playing a
CD.
2. PAUSE - Active when the unit is paused.
3. CUE - Flashing when the unit is setting a cue
point. Active when the unit is paused at a cue
point.
4. SCRATCH – indicates when the wheel will cue as a
smooth transition over the music creating a
scratch effect. When not lit the wheel will cue in
the customary stutter style.
5. SINGLE - Shows when the unit is set to play just
one track at a time.
6. TRACK - Shows the track that the unit is playing.
7. PROGRAM – On when a sequence of songs is
preprogrammed into the unit.
8. TOTAL TRACK – shows number of tracks available
on the CD.
9. MINUTES - Shows the minutes elapsed or
remaining depending on mode setting.
10. SECONDS - Shows the seconds elapsed or
remaining depending on mode setting.
11. FRAMES - The CD Player breaks down a second
into 75 frames for accurate cueing. This shows the
frames elapsed or remaining depending on mode
setting.
12. BPM – Indicates the current BPM.
13. KEY – Lights when key effects are active and
indicates key position.
14. LOCK – Lights when key has been locked
15. PITCH – Shows current pitch position.
16. TIME MODE (TOTAL) indicates when full CD
remain time is showing.
17. TIME MODE (REMAIN) shows how much time is
left on a particular track.
18. TIME BAR - Shows either track time remaining,
total CD time remaining or track elapsed time
depending on the setting of the “TIME” button.
Note: The bottom bar will follow the CD when the
“Scratch” effect is on.
19. TIME MODE (ELAPSED) is for showing time as it
is taking place.
20. SEARCH – Shows when the wheel is active for the
search effect.
21. AUTOSTART- Indicates when the CD is set to
relay.
22. HOT – Active when hot points have been set.
23. LOOP INDICATOR – Activates as loops are
playing.
24. 1,2 – Indicates which hot points or loops are set.
25. EFFECT – indicates when wheel is in effect mode.
26. HOLD – indicates when effects are being held in
position.
27. EFFECT PARAMETER – Shows the current effect
setting.
28. MASTER/SLAVE – indicates side dominance in
interlock functions
- The Leader in DJ Technology
©2002 Numark Industries - 8 - http://www.numark.com