Nikon LT170 - Manual (Page 14)

E-14
AUDIO IN
L R
AUDIO OUT
L R
Component
Y Cb Cr
COMPUTER S-VIDEO IN AUDIO IN
AC IN
VIDEO IN
COMPUTER AUDIO IN
INSTALLATION AND CONNECTIONS
Connecting Your DVD Player
DVD player
You can connect your projector to a DVD player with component output or Video output. To do so, simply:
1. Turn off the power to your projector and DVD player.
2. If your DVD player has the component video (Y,Cb,Cr) output, use a commercially available component video cable (RCA ן 3) and the optional 15-
pin-to-RCA (female) ן 3 cable to connect your DVD player to the COMPUTER input connector on the projector.
For a DVD player without component video (Y,Cb,Cr) output, use common RCA cables (not provided) to connect a composite VIDEO output of the
DVD player to the Video Input of the projector.
3. Turn on the projector and DVD player.
NOTE: Refer to your DVD player's owner's manual for more information about your DVD player's video output requirements.
Component video RCA ן 3 cable
(not supplied)
Optional 15-pin-to-RCA
(female)
ן 3 cable (ADP-CV1)
Audio cable
(not supplied)
Audio Equipment