NetComm NTC-990 - Manual (Page 21)

For NTC-790, the following band settings options are applicable.
UMTS 850MHz Only = UMTS 850 MHz Only
WCDMA ALL = UMTS 850/2100/1900MHz
UMTS 850MHz, 2G = UMTS 850 MHz GSM/EDGE/GPRS 900/1800/1900MHz
2G = GSM/EDGE/GPRS 900/1800/1900MHz
All Bands (autoband) = UMTS 850/2100/1900MHz GSM/EDGE/GPRS 900/1800/1900MHz
For NTC-990, the following 900Mhz band setting options are applicable.
UMTS 900MHz Only = UMTS 900 MHz only
WCDMA ALL = UMTS 900/2100/1900MHz
UMTS 900MHz, 2G = UMTS 900 MHz GSM/EDGE/GPRS 900/1800/1900MHz
2G = GSM/EDGE/GPRS 900/1800/1900MHz
All Bands (autoband) = UMTS 900/2100/1900MHz GSM/EDGE/GPRS 900/1800/1900MHz
NOTE – After changing the band if the band does not get set correctly or is not reflected on the frequency
field on the “Home” Status page then you may need to reboot the unit by clicking on the Reset Button on
the top right hand corner of the page.
Revision 1.55 NetComm Limited
March 2009
20