NetComm NTC-990 - Manual (Page 22)

6 How to Establish a Connection to the cellular network
This section describes how to set up the Cellular Router to initiate a Wireless connection.
There are 2 different ways to set up a wireless connection via PPP:-
• Initiating the PPP Connection directly from the Cellular Router acting as the PPP Client (most
common).
• Initiating the PPP Connection from a different PPP client (i.e. laptop or router) with the Cellular
Router running in PPPoE mode. This mode is used for example, when you also have an ADSL
connection present such that if the Wireless connection on the Cellular Router fails then the ADSL
router can be used as backup.
Revision 1.55 NetComm Limited
March 2009
21