Connecting the projector to the media server – NEC NP2250 User Manual
Page 93
9
5. Using the Viewer
Connecting the projector to the media server
Press the VIEWER button on the remote control.
The VIEWER will start.
• Another way to start the VIEWER is to press the SOURCE button a few times on the projector cabinet. (
→ page
25
)
• This will start searching for a computer with “media sharing” enabled in the network and add it to the “Media
server” of the thumbnail screen.
Another way to do this is to point the cursor to “Media server” and select [REFRESH] from the thumbnail menu
and press the ENTER button.
NOTE:
• Up to four accessible media servers can be automatically searched and displayed. The fifth device or later cannot be displayed.
See “Operating the Viewer Function from the Projector (playback)” for more information. (
→ page
67
)