Speed dial – NEC DS1000 User Manual
Page 179
To program a System Speed Dial number:
Normally, only attendants and supervisors can
store System Speed Dial numbers. Find out from
your Communications Manager if you can.
1.
Press and
dial
.
OR
Press + .
2.
Dial the system bin number (normally 200-299).
3.
Press .
4.
Enter the line number you want the system to use when
dialing your stored number (e.g., 1 for line 1).
OR
Enter the line group number you want the system to use
when dialing your stored number (e.g., 90 for group 0).
OR
Press
if you want to enter Intercom codes.
5.
Press .
6.
Enter the number you want to store (up to 16 digits long).
You can enter any combination of the digits 0-9, #
and *. To insert a pause in your Speed Dial number,
press
MIC
. To insert a Flash in your Speed Dial
number, press
FLASH
. These entries count as digits.
7.
Press .
8.
Enter a name for the Speed Dial number.
See Entering Speed Dial names for more.
9.
Press .
SPD
PGM
171
Speed Dial
80000mfh08-01.qxd 12/10/04 3:20 PM Page 171