NEC DS1000 - Manual (Page 40)

Automatic Call Screening
With Automatic Call Screening enabled, your extension will
immediately screen (broadcast) an incoming message as soon as
the caller starts to leave the message in your mailbox. You hear
two beeps followed by the caller’s voice.
MW LED Operation Change
If your system provides Call Screening capability, only your
Ring/Message Lamp flashes for new messages. Your
MW LED is
used for Call Screening only.
Using Manual Call Screening
When Automatic Call Screening is off, you hear a single beep and
MW flashes fast while IntraMail records your caller’s message.
Your telephone display automatically changes to show the Call
Screening soft key options. Call Screening is only available while
your telephone is idle.
To intercept the call (and stop recording the message):
● Press or flashing MW .
To hear your caller’s message as it is recorded in your mail-
box (i.e., activate the Call Screening mode):
● . Press .
— To intercept the call (and stop recording the message):
Press , or
Press SPK , or
Lift the handset, or
Press
MW .
ANSWER (ANSW)
SCREEN (SCRN)
ANSWER (ANSW)
Call Screening (with IntraMail)
32
80000mfh08-01.qxd 12/10/04 3:20 PM Page 32