NETGEAR ProSafe FVX538 - Manual (Page 5)

Network Planning Guide for ProSafe VPN Firewall Router FVX538
Introducing the FVX538 1-1
October 2004
Chapter 1
Introducing the FVX538
This chapter introduces the FVX538 ProSafe VPN Firewall Router.
The Router’s Front Panel
The FVX538 ProSafe VPN Firewall Router front panel shown below contains the port
connections, status LEDs, and the factory defaults reset button.
Figure 1-1: FVX538 Front Panel
You can use the LEDs to verify various conditions. Table 1-1 lists and describes each object on the
front panel of the router and its operation.
Table 1-1. Object Descriptions
Object Activity Description
Power LED On (Green)
Off Power is supplied to the router.
Power is not supplied to the router.
Test LED On (Amber)
Blinking (Amber)
Off Test mode: The system is initializing or the initialization has failed.
Writing to Flash memory (during upgrading or resetting to defaults).
The system has booted successfully.
Test
Power
Factory
Defaults WAN1 WAN2
Gigabit
ProSafe VPN Firewall
1 4
5 8
MODEL FVX 538
LAN
DMZ
Link/Act
Link/Act Speed
100
Active Active
Link/Act 100 Link/Act 100
CONSOLE
Power Test
LED LED
WAN1 Port
and LEDs
WAN2 Port
and LEDs
LAN Ports
and LEDs
Console
Port
Factory
Defaults
Gigabit Port
and LEDs
DMZ Port
and LEDs
Button