NETGEAR ProSafe FVX538 - Manual (Page 8)

Network Planning Guide for ProSafe VPN Firewall Router FVX538
1-4 Introducing the FVX538
October 2004
The Router’s IP Address, Login Name, and Password
Check the label on the bottom of the FVX538’s enclosure if you forget the following factory
default information:
• IP Address: http://192.168.1.1 to reach the Web-based GUI from the LAN
• User name: admin
• Password: password
Figure 1-4: FVX538 Bottom Label
Default Factory Settings
When you first receive your FVX538, the default factory settings will be set as shown in Table 1-2
below. You can restore these defaults with the Factory Defaults restore switch on the front panel —
see
“The Router’s Front Panel” on page 1-1 .
• Pressing this switch for a prolonged period (>5 seconds) causes the router to restore all factory
default settings and reboot.
• A shorter press and release causes the router to merely reboot.
ProSafe VPN Firewall FVX538
MAC
(internet)
http://192.168.1.1
user name: admin
password: password
DEFAULT ACCESS
MAC
(internet)
272-10134-01
SERIAL MAC
(local)
N10947 E-E011-02-4749 (B) IP Address
User Name
Password