NDC comm NWH650 - Manual (Page 33)

InstantWave High Rate 11Mbps Access Point 27
Figure 24. AP Properties
Here you may modify the IP address and Community string. Changes made here
will be immediately effective.
If the connection attempt was unsuccessful, a message box will appear informing
you that the request had no response. Click OK to close the message box and
return to the main screen. Go through the procedure again to retry. If you cannot
connect to the AP after three attempts, check that the AP information has been
correctly entered in the Host Table and that the Access Point (AP) is functioning.
Managing Configurations
Config
If the AP selection is successful, the Config and View main menu items will be
enabled. Click the Config main menu item (or right-click on the AP name in the
APMS window) to open a sub-menu.
Figure 25. Config/AP Setting