NETGEAR PS111W - Manual (Page 14)

NetGear Print Server Manual
Chapter 2 Installation
This chapter describes the installation and setup of the NETGEAR Model PS111W Printer Server.
2-1 Preparing the Site
Before you begin installing the print server, prepare the installation site. Make sure the operating
environment meets the physical requirements of the print server, as described below.
2-2 Verifying Package Contents
Your package should contain the following:
• Model PS111W Printer Server
• 12V 800mA DC Power adapter
• PS111W Print Server Resource CD
• PS111W Print Server Installation Guide
• Warranty & Owner Registration Card
• Customer Support Phone Card
Call your reseller or NETGEAR Customer Support in your area if there are any wrong, missing, or
damaged parts. Refer to "Customer Support" section for the location of customer support in your area.
Keep the carton, including the original packing materials. Use them to repack the print server if you
need to return it for repair.
5