NETGEAR PS111W - Manual (Page 88)

NetGear Print Server Manual
Default Configuration
Click "Yes" to confirm setting to factory defaults, or "No" to leave the current configuration
unchanged.
Printer Menu
Individual printer ports are displayed as options under the Printer Menu, and a pop-up window opens
when any of the printer ports are selected, as in the example below.
Printer Status
The printer ports not existing on the print server are shadowed or grayed out.
On the popup window, you can check the connection status of the print server such as on-line, off-line,
paper jam, and out-of-paper. Also on display is the printing information indicating if the print server is
sending data to the printer or if the printer is idling. At the bottom of the screen are four buttons as
described below.
Printer Status
Field Description
Configure Button If the connected printer supports directional communication such as many of the new Hewlett-Packard
LaserJet and DeskJet printers, you can click on this button to customize the various printing parameters
of the printer. The pop-up window consists of a table with the following column headings:
Environment Variable
The configuration variables available on this printer. The list of printer configuration variables vary
from printer to printer.
Variable Value
Displays the current setting. To change the Variable Value (if Read Only is NO) double- click the line
79