N-Tron 702M12-W - Manual (Page 18)

Revision 04062009 Page 18 of 52
Configuration Guide
This guide presents the detailed description of the N-TRON 702-W operating system which is integrated
into the N-TRON 702W.
N-TRON 702-W Quick Setup Guide describes the configuration steps for the subscriber station (wireless
client - bridge).
All the configuration settings accessible via web management interface are described in this document.
Device support the following operating modes for 802.11 a/b/g/n:
Station (Client)
Station WDS
Access Point
Access Point WDS / Peer
All the devices support the following network modes:
Transparent bridge- layer 2
Router- layer 3
Navigation
Configuration Management Menu
Each of the web management pages (listed below) contains parameters that affect a specific aspect of the
device:
System Info page displays current status of the device and statistical information. There are useful network
administration and monitoring tools available on the Main page (i.e. speed test utility, site survey
functionality in AP mode).
Link Setup page contains the controls for the wireless network configuration, covering basic wireless
settings which define device operating modes, associating details, and data security options.
Network page covers the configuration network operating modes, IP settings, packet filtering routines and
network services (i.e. DHCP Server).
Advanced page settings are dedicated for more precise wireless interface control, including RTS,
fragmentation, aggregation, traffic shaping and QoS settings.
Services page covers the configuration of system management services (i.e. SNMP, NTP, Ping Watchdog,
Web, Telnet, SSH, Log).
System Config page contains controls for system maintenance routines, administrator account management,
Host Name, firmware and configuration backup.