NETGEAR ReadyNAS 2100 - Manual (Page 95)

ReadyNAS 2100 User Manual
Optimizing Performance and Maintaining the System 5-7
v1.1, June 2009
Control Panel Status and Diagnostic Information
The function of each Control Panel item is described in the following table:
Figure 5-7
Table 5-1. LED Descriptions
Item Activity Description
1. Backup
Button.
Push button Backup: Push to initiate FrontView scheduled backup jobs.
Diagnostics: Toggles between boot menu options (see SYS Reset
below).
Boot Sequence: Press to initiate boot from external USB.
2. USB
Status
LED.
On (Green)
Blinking
(Green)
Off On: A USB device is mounted.
Blink: USB device dismounting or scheduled backup running.
Off: USB device dismounted.
See SYS Reset below for other boot codes.
3. Disk LEDs.
On (Green)
Blink (Green)
Off
LEDs
• On green: Disk installed.
• Blinking in unison: Power button pressed once; press the power
button a second time to initiate a graceful shutdown.
• Blink: Disk resynching or disk failure.
• “Marching” LEDs: Volume expansion in progress.
• Off: No disk installed
Diagnostic LED indicators:
• 1 & 2 stay on if boot memory test fails.
• 1 & 3 stay on if device cannot boot.
• Alternating between all Disk LEDs on and only Disk 2 LED on
means no disk detected.
• Alternating between all Disk LEDs on and only Disks 1 & 2 LEDs on
means boot failure, possible corrupted root.
• See SYS Button below for other boot codes.
4. LAN1
and
LAN2
Ports.
On (Green)
Off On: The LAN port is linked.
Off: The LAN port is disconnected.
1 2 3 4 6 5