NEC MultiSync LCD 1810X - Manual (Page 32)

Appendix
Español
Français
Deutsch
English
Italiano
Colour Control System
Five colour presets select the desired colour setting. Each
colour setting is adjusted at the factory.
R,G,B: Increases or decreases Red, Green or Blue colour
depending upon which is selected. The change in colour will
appear on screen and the direction (increase or decrease)
will be shown by the bars.
Tools 1
SMOOTHING
Select one of three image sharpness settings. This function
is only valid when the expanded display function (expansion
function) is on.
TEXT MODE
Use this to display text clearly.
NORMAL MODE
This sharpness is between TEXT and GRAPHIC MODE.
GRAPHIC MODE
This mode is suited for images and photographs.
EXPANSION MODE
Sets the zoom method.
FULL SCREEN
The image is expanded to 1280 x 1024, regardless of the
resolution.
KEEP ASPECT
The image is expanded without changing the aspect ratio.
EXPANSION OFF
The image is not expanded.
CUSTOM (DIGITAL INPUT ONLY)
Select one of four expansion rates.
In this mode the resolution may be low and there may be
blank areas. This mode is for use with special video cards.
E - 17 Controls
CN912B-2/LCD1810X/78135322 00.5.26, 0:04 PM 32