NEC MultiSync LCD 1810X User Manual
Page 33
Appendix
Español
Français
Deutsch
English
Italiano
VIDEO DETECT
Selects the method of video detection when two computers
are connected.
NONE
The monitor will not switch the video inputs automatically,
only by user control.
FIRST DETECT
The video input has to be switched to “FIRST DETECT”
mode. When current video input signal is not present,
then the monitor searches for a video signal from the other
video input port. If the video signal is present in the other
port, then the monitor switches the video source input
port to the new found video source automatically. The
monitor will not look for other video signals while the
current video source is present.
LAST DETECT
The video input has to be switched to the “LAST DE-
TECT” mode. When the monitor is displaying a signal
from the current source and a new secondary source is
supplied to the monitor, then the monitor will automati-
cally switch to the new video source. When current video
input signal is not present, then the monitor searches for
a video signal from the other video input port. If the video
signal is present in the other port, then the monitor
switches the video source input port to the new found
video source automatically.
DVI SELECTION
This function is selected the DVI input mode. When the DVI
selection has been changed, you must restart your computer.
DIGITAL
DVI digital input is available.
ANALOG
DVI analog input is available.
SOUND
Adjusts the volume of the earphones jack.
Controls
E - 18
CN912B-2/LCD1810X/78135322
00.5.26, 0:04 PM
33