NEC 16D and 8D - Manual (Page 4)

by Jerry W. Sharp, 9/14/07 Page 4 of 4
To Store/Dial System Speed Dial
Numbers
(Available System wide)
To Store System Speed Dial Numbers
• Press the Prog soft key
• Press the down arrow soft key
• Press the SYS soft key
• Dial the bin number (001-999) to program
• Dial 9 and the Phone Number
• Press the Hold button (hear beep/beep/beep tone)
• Enter the Name using the keypad
• Press the Hold button to save (hear
beep/beep/beep tone)
• Press the Speaker button to quit
To dial the System Speed Dial Numbers
• Press the Dir soft key
• Press the SYS soft key
• Use the up/down arrow soft keys to scroll through
the numbers
• Or enter the first letters of the name and use the
up/down arrow soft keys to scroll through the
numbers
• Press the Dial soft key to dial the displayed
number
To Program DSS/One Touch Keys
DSS (Direct Station Select) or One Touch Buttons
• Press the Prog soft key
• Press the arrow down soft key
• Press the Fctn soft key
• Press the Button to be programmed.
• Dial 01
• Dial the 3-Digit Extension Number to call or dial 9
and the outside Phone Number. (000 erases the
button)
• Press the Hold button,(hear beep/beep/beep tone)
• Select another button, dial 01, Number, Hold or
• Press the Speaker button to quit
• DESI lite software (Free) and DESI labels are
available from Certified to re-label your phone.
Setting the Clock
To set the Clock, for Daylight Saving Time Changes
• Press the Speaker button (from Administrators
Phone only)
• Dial 728 + Time, (4-Digits in 24hr. format
0830=8:30 AM, 1645=4:45PM)
• Press the Speaker button to quit
To Store/Dial the Station Speed Dial
Numbers
(Available at the individual station only)
To Store Station Speed Dial Numbers
• Press the Prog soft key
• Press the STA soft key
• Dial the bin number (0-9) to program
• Dial 9 and the Phone Number
• Press the Hold button (hear beep/beep/beep tone)
• Enter the Name using the keypad
• Press the Hold button to save (hear
beep/beep/beep tone)
• Press the Speaker button to quit
To dial the Station Speed Dial Numbers
• Press the Dir soft key
• Press the STA soft key
• Use the up/down arrow soft keys to scroll through
the numbers
• Or enter the first letters of the name and use the
up/down arrow soft keys to scroll through the
numbers
• Press the Dial soft key to dial the displayed
number
To Program CO Line Keys
To Program the outside line buttons
• Press the Speaker button
• Dial 752
• Press the Button to be programed
• Dial *01
• Dial the CO Line Number 001-200 (hear
beep/beep/beep tone) (000 erases the button)
• Press the Speaker button to quit
• DESI lite software (Free) and DESI labels are
available from Certified to re-label your phone.
Program Station Names
To change the phone users name
• Press the Speaker button
• Dial 700
• Dial the 3-digit Extension Number to change
• Enter the Name using the keypad
• Press the Hold button to save
(hear beep/beep/beep tone)
• Press the Speaker button to quit