8 working with the map, 1 maps, 8working with the map – Navigon MN 6 User Manual
Page 32
User’s manual MobileNavigator 6
- 30 -
Working with the map
Simulation
Simulates a navigation based on the displayed route. This
simulation can be undertaken without GPS reception.
However, simulation is restricted to routes of 60 mi max.
Traffic
Opens the T
RAFFIC INFORMATION
window, in which pending
reports can be listed. For detailed information, please refer to
chapter TMC (Traffic information) on page 38.
Rename
Opens a window in which you can change the name for the
selected destination or route.
Factory settings
Opens a window in which you can reset all settings to the
original factory settings.
Delete destination
Seletes the marked destination from the (L
AST DESTINATIONS
or F
AVOURITES
) lists. A dialog box prompts you to confirm.
Save destination
Saves the given address in the F
AVOURITES
list.
For detailed information, please refer to chapter Saving a
destination on page 22.
Add to route
Opens the route planning system. The address entered will be
entered as the first route stage of a new route.
For detailed information, please refer to chapter Routes with
various stages on page 23.
8
Working with the map
8.1
Maps
Even if you have stored numerous navigation maps on the
navigation system's memory card, MobileNavigator 6 can
only work with one map at a time.
Tap on Options > Settings > Current map, in order to see
which map is currently being used. You can also select another
map.