Navigon MN 6 - Manual (Page 42)

User’s manual MobileNavigator 6
- 40 - Configuring MobileNavigator 6
▶ Some settings can accept many different values. These
settings are recognisable by means of the (List)
button. The current valid value is visible.
Tap the (List) button.
A list with all possible values opens up. The current valid
value is marked.
Tap on the desired value. It will now be marked.
Tap on the OK button.
The list closes again. The new value will be displayed.
▶ For each setting is a (Help) button. When you tap on
it, you will see a precise explanation of the corresponding
setting.
You can close the settings windows in two ways:
▶ Tap the Done button. Any changes you have made will be
stored.
▶ Tap the Cancel button. Any changes you have made will
not be stored.
The S
ETTINGS
window is re-opened.