NEC 2400IPX - Manual (Page 18)

T
O VERIFY
(
WITH
D
TERM
8D/16D/32D)
◆ Press Feature button.
◆ Press desired Speed Dial button.
◆ Display indicates digits programmed.
Note 1: To program a hook switch for transfer or
feature activation, press
Recall key as first digit.
( ! displays on LCD.)
Note 2: To program a pause, press the Recall key as
any digit other than the first digit. (– displays on LCD.)
Note 3: To program a Voice Call, press Transfer
key after dialing station number. (V displays on LCD.)
Note 4: Speed calling for feature access:
Speed call keys may use a feature key by storing the
NEAX2400 IPX feature access code. The feature may
be programmed on a system basis by the PBX engineer.
Access codes may be stored in conjunction with
telephone numbers. For example, one button can be
programmed by the user to transfer to a certain
extension.
TO ORIGINATE A CALL
USING SPEED CALLING
(INDIVIDUAL/GROUP)
◆ Press the Redial button.
◆ Press the desired
speed calling
number. XXXXXX
-X LNR[*]/SPD[ ]
18
*NEC-405 NEAX2400 UG #2 1/22/03 2:42 PM Page 18