NEC 2400IPX User Manual
Page 25
I
F UNANSWERED
◆
After preprogrammed time, Automatic Recall
is initiated.
◆
Visual and audible signal (rapid flash and ring
burst) is sent to station that placed call on hold.
Note 1: A transfer or conference call may be placed
on hold depending on software level of the
NEAX2400 IPX.
Note 2: Hold shows as a flashing green LED on
your phone. The same line on other phones shows
as a flashing red LED.
Recall
shows as a flashing
green LED on your phone and flashing red LED on
other phones with the same line.
TO PLACE A CALL ON
EXCLUSIVE HOLD
◆
Press
Hold
twice.
Line appearance
indicates
interrupted wink.
Note: If held line appears on other Dterm stations,
LED remains steadily lit red.
T
O RETRIEVE
◆
Lift handset or press
Speaker
.
◆
Press held line. Use handset to converse.
Note: Only the Dterm that set Exclusive Hold
option can retrieve the call.
2001
E_HOLD
(Time Display)
Held station
number
27
*NEC-405 NEAX2400 UG #2 1/22/03 2:42 PM Page 27