NEC LT81 User Manual
Page 29
Advertising
Ⅵ
The Remote Mouse Receiver as a mouse for your computer
INSTALLATION
55
56
Serial cable (supplied)
Serial cable
(supplied)
Remote cable
(supplied with LT100 only)
Remote Control
Output
Ⅵ
The Remote sensors on the projector cabinet work as the remote sensor
on the Remote Mouse Receiver (LT100 only)
Ⅵ
You can daisy-chain as many as five projectors and operate them with the same remote control. (LT100 only)
To do so:
1. Turn off your computer.
2. Use the remote control cables supplied to connect the Remote Control Output of one
projector to the Remote Control Input of the next until all the projectors are connected.
RGB INPUT
S-VIDEO
OUTPUT
INPUT
RGB
REMOTE
CONTROL
Insert the supplied remote cable here.
Remote cable
(supplied with LT100 only)
Advertising