Nortel WLAN IP 2210 - Manual (Page 23)

Chapter 2 WLAN Handsets overview 23
WLAN IP Handset 2210/2211/2212 User Guide
8 Scroll to one of the desired options:
• Off — vibration is turned off.
• PBX — vibration uses the distinctive pattern sent to the handset from the call server.
• Continuous — vibration is continuous.
• Short Pulse — vibration occurs in short bursts.
• Long Pulse — vibration occurs in long bursts.
9 Press the Select button (or OK ) to select the highlighted option.
10 Do one of the following:
• Press UP to return to the previous menu and configure another option.
• Press to exit all menus and return to the standby state.
You can also press Exit from the top-level menu to exit the menu and return to the active
(off-hook) state.
To select the Ring Delay
1 Press when the handset is in the standby state.
2 Press the Up and Down buttons to scroll through the menu and highlight Ring Options .
3 Press the Select button (or OK ) to select Ring Options .
4 Press the Up and Down buttons to scroll through the menu and highlight Telephone Ring .
5 Press the Select button (or OK ) to select Telephone Ring .
6 Press the Up and Down buttons to scroll through the menu and highlight Ring Delay .
7 Press the Select button (or OK ) to select Ring Delay .
8 Scroll to one of the desired options:
• No Delay — the handset rings and vibrates immediately.
• 5 Second Delay — the handset vibrates for five seconds before ringing starts.
• 10 Second Delay —the handst vibrates for 10 seconds before ringing starts.
9 Press the Select button (or OK ) to select the highlighted option.
10 Do one of the following:
• Press UP to return to the previous menu and configure another option.
• Press
to exit all menus and return to the standby state.
You can also press Exit from the top-level menu to exit the menu and return to the active
(off-hook) state.
Note: Ring Delay is not displayed in the menu when Ring Cadence or Vibrate
Cadence is turned off.