Nortel WLAN IP 2210 User Manual

Page 47

Advertising
background image

Chapter 5 Troubleshooting

47

WLAN IP Handset 2210/2211/2212 User Guide

Erasing memory

The WLAN Handset has determined that
a download should occur and is erasing
the current software from memory.

None. When the progress bar fills the
display line, the erase operation is
complete.

Do not turn the WLAN Handset off
during this operation.

Files Too Big

The WLAN Handset software download
files are incorrect or corrupted.

Contact your system administrator.

Flash Config Error

The WLAN Handset is configured wrong. Contact your system administrator.

Initializing …

The WLAN Handset is performing power
on initialization.

None. This is informational only.

Internal Err. # #

The WLAN Handset has detected a fault
from which it cannot recover.

Record the error code so it can be
reported. Turn the WLAN Handset off,
then on again. If error persists, contact
your system administrator.

Invalid ID Info

The VPN server did not recognize yo.

Contact your system administrator.

Multiple SVP Svr
yyy.yyy.yyy.yyy

The WLAN Handset is attempting to
communicate with two WLAN IP
Telephony Managers 2245.

If this persists, record the information and
contact your system administrator.

Must Upgrade SW!

The WLAN Handset software is
incompatible with the hardware.

Contact your system administrator.

Net Busy

xxxxxxxxxx

All access points are full or busy.

Try call again later.

No DHCP Server

The WLAN Handset is unable to contact
the DHCP server.

Contact your system administrator

No ESSID

The WLAN Handset is configured wrong. Contact your system administrator.

No Func Code

The WLAN Handset software download
files are incorrect or corrupted.

Contact your system administrator.

No Host IP xxxxxxxxxx

The WLAN Handset is configured wrong. Contact your system administrator.

No IP Address

Invalid IP address.

Contact your system administrator.

No Net Access

Cannot authenticate/associate with
access point

Contact your system administrator.

No Net Found

Can be caused by a variety of issues

Contact your system administrator.

No Net Found xxxxxxxxxxx yy

The WLAN Handset cannot find a
suitable access point.

Record the error information and contact
your system administrator.

No PBX Response

The WLAN Handset tried to send a
message to the Call Server and failed to
get a response.

Contact your system administrator.

No Proposal

The WLAN Handset is configured wrong. Contact your system administrator.

No Reg Domain

Regulatory Domain not configure

Contact your system administrator.

No SVP IP

The WLAN Handset is configured wrong. Contact your system administrator.

No SVP Response
yyy.yyy.yyy.yyy

The WLAN Handset has lost contact with
the SVP server.

If the problem persists, record the error
information and contact your system
administrator.

No SVP Server

The WLAN Handset is configured wrong. Contact your system administrator.

Table 5 WLAN Handset messages, descriptions, and actions

Message

Description

Action

Advertising