Nikon COLLPIX L22 - Manual (Page 108)

96
Basic Camera Setup: The Setup Menu
Sh
oot
in
g, P
laybac
k an
d Se
tu
p Me
nus
U Motion detection
Set whether or not the camera automatically increases the shutter speed to
reduce blurring when motion is detected while shooting still pictures.
The icon for the current setting is displayed in the monitor when the camera is in
shooting mode (
A 21). When the camera detects shaking and increases shutter
speed, the motion detection indicator turns green. No icon is displayed when
Off
is selected.
Press d M z (setup menu) (A 86) M U Motion detection
Auto (default setting)
In order to reduce the effects of camera shake or subject movement, ISO
sensitivity and shutter speed are increased when the camera detects camera
shake or subject movement.
However, motion detection does not function in the following situations.
• When flash mode is set to m (fill flash)
• When Multi-shot 16 (A 78) is selected
• When scene mode is set to Night portrait (A 37), Dusk/dawn (A 39),
Fireworks show (A 41) or Backlight (A 41)
Off
Motion detection is not enabled.
B
Notes on Motion Detection
• Blurring caused by camera shake or subject movement may not be eliminated in some situations.
• Motion detection may not function if camera shake or subject movement is excessive, or if there is
insufficient lighting.
• The pictures taken may become somewhat grainy.