Nikon COLLPIX L22 - Manual (Page 33)

21
Step 1 Turn the Camera On and Select G (Easy Auto) Mode
Bas
ic Ph
otography an
d Pl
ayba
ck
: E
asy
A
u
to
Mod
e
Indicators Displayed in G (Easy auto) Mode
The indicators and photo info displayed during shooting and playback will turn off
after a few seconds (
A 92).
When the monitor has turned off in standby mode to save power, press the power
switch, the shutter-release button, or A to reactivate it (
A 99).
4 4
Shooting mode
When using easy auto mode, U, e, f,
g, h, i, or j is displayed to
indicate the shooting mode selected by the
camera for the current subject and framing.
Internal memory indicator
Pictures will be recorded to internal memory
(approximately 19 MB).
When memory card is inserted, C is not
displayed and pictures will be recorded to
memory card. Image mode
Display image size and quality set in
the image mode menu.
The default settings are as follows:
L22: L 4000×3000
L21: y 3264×2448
Motion detection indicator
Reduce the blurring caused by
subject or camera shake.
C
Available functions in easy auto mode
• When the camera is pointed at a person’s face, the camera automatically detects the face and
focuses on it ( A 24, 28).
• The flash setting can be set to W (off) (A 30).
• The self-timer (A 32) and exposure compensation (A 34) are available.
• The macro mode button on the multi selector (A 11, 33) is disabled. Changes to macro mode
when the camera selects close-up scene mode.
• Image mode (A 74) can be changed by pressing d.
D
Motion Detection
See
Motion detection (A 96) in the setup menu (A 85) for more information.
D
Electronic Vibration Reduction
When the flash mode ( A 30) is set to W (off) or Y (slow sync) while Electronic VR (A 95) in the
setup menu is set to
Auto, the R icon may be displayed in the monitor. R indicates shooting
conditions in which the effects of camera shake can be pronounced. In these situations, the camera
reduces the effects of camera shake in pictures before saving them.