Nortel Networks OPTera Metro 3500 - Manual (Page 154)

2-116 Operation, administration, and maintenance (OAM) features
OPTera Metro 3500 Multiservice Platform NTRN10AN Rel 12.1 Standard Iss 1 Apr 2004
• TCA summary alarms will not clear if;
— the equipment or facility that a summary alarm is raised against is put
out-of-service (OOS).
the equipment or facility that a summary alarm is raised against is removed
without first deleting the equipment of facility.
Site Manager support
Site Manager Release 6.0.1 is used to operate, administer, maintain, and
provision network elements at a nodal level. For more information, refer to the
Site Manager Planning and Installation Guide, NTNM35FA.
Site Manager incorporates data applications, which manages OPE
provisioning, and the TL1 Command Builder.
When you log in to Site Manager, the main window is displayed. See Figure
2-41 on page 2-117 .
Preside Software Upgrade Management support
The purpose of Preside Software Upgrade Management (PSUM) is to deliver
new software to the processors of one or more network elements (NE), and to
upgrade the circuit pack cards on these network elements.
Preside SUM is a network-level application installed on the Preside
Applications Platform. Preside SUM provides fast, simple, and reliable
software upgrade deployment across a network, from a single location.
Preside SUM Release 3.0 supports the upgrade of OPTera Metro 3500 network
elements controlled by a network processor (NP).
For more information on Preside Software Upgrade Management capability,
refer Preside Software Upgrade Management Release 3.0 documentation
(NTNM26DA).