NetComm NP2624M - Manual (Page 37)

NP2624M User Guide 37
YML827 Rev1
4. The following parameters can be configured on each port , click the Apply button to modify
Parameter Description
Port Number Select the port number.
Path Cost Specifies the path cost of the port that the switch uses
to determine which ports are the forwarding ports.
The lowest number is forwarding ports, the range is
1-65535 and default value base on IEEE802.1D
10Mb/s = 50-600 100Mb/s = 10-60 1000Mb/s = 3-10
Port Priority You can make it more or less likely to become the
root port, the range is 0-255, and default setting is
128.
The lowest number has the highest priority.
Edge Port Edge Port is a port connected to a device that knows
nothing about STP or RSTP. Usually, the connected
device is an end station. Edge Ports will keep in
forwarding state and skip the listening and learning
state. When the link on the edge port is changed, the
RSTP topology is not affected.