NetComm NP2624M - Manual (Page 55)

NP2624M User Guide 55
YML827 Rev1
2.7. Configuration Backup
2.7.1. TFTP Restore Configuration
Use this page to set the ftp server address. You can restore the EEPROM value from here, but you
must restore the image in the ftp server, the switch will then download the flash image back.
2.7.2. TFTP Backup Configuration
Use this page to set TFTP server IP address. You can save current EEPROM value from here, then
go to the TFTP restore configuration page to restore the EEPROM value.