NETGEAR RangeMax Next Wireless PCI Adapter WN311B - Manual (Page 35)

NETGEAR RangeMax NEXT Wireless PCI Adapter WN311B User Manual
Network Connections and Wireless Security 2-13
v2.0, February 2007
• 64-bit WEP data encryption
• 128-bit WEP data encryption
4. Select Create with Passphrase and enter the passphrase. The configuration utility will
automatically generate the WEP keys.
If the passphrase method is not available in the other devices, you must manually enter the
keys to match exactly what is in the access point and other 802.11b/g wireless devices.
5. Save your settings in a Profile.
a. Click the Save Profile button. All the configuration settings are saved in this profile.
b. Click Apply, and then click Close to exit the Smart Wizard.
Setting up WPA2-PSK Security
To set up WPA2-PSK Security:
1. Run the WN311B Smart Wizard.
a. Make sure the WN311B software is installed and the WN311B Wireless PCI Adapter is
properly installed in the PCI slot in your computer.
Note: Larger encryption keys require more processing and may slow the
communications response times.
Note: The characters are case sensitive. Be sure to use the same passphrase for all the
wireless devices in the network.