NETGEAR RangeMax Next Wireless PCI Adapter WN311B - Manual (Page 36)

NETGEAR RangeMax NEXT Wireless PCI Adapter WN311B User Manual
2-14 Network Connections and Wireless Security
v2.0, February 2007
b. Use the icon to open the Smart Wizard. The Settings tab page opens.
2. Configure the Security settings.
a. In the Profiles box, select the profile or type in a profile name.
b. In the Network Name (SSID) field select the network, or enter the SSID.
c. In the Security section, select WPA2-PSK [AES], and enter the passphrase.
The passphrase can be a word or group of printable characters. For more information
about WPA2-PSK security, see the Web link to
“Wireless Communications:” in
Appendix B .
3. Save your settings in a Profile.
a. Click the Save Profile button. All the configuration settings are saved in this profile.
b. Click Apply, and then click Close to exit the Smart Wizard.
Setting up WPA-PSK Security
To set up WPA-PSK Security:
1. Run the WN311B Smart Wizard.
Figure 2-10
Note: You will not get a wireless network connection unless the network SSID
matches exactly what is configured in the access point.