Nokia Remote Camera - Manual (Page 44)

C o n f i g u r e t h e s e t t i n g s
44 Copyright © 2005 Nokia. All rights reserved.
Tip: If you are using Remote Camera Manager, select Settings >
Time settings. When you have made all the necessary
configurations, select Options > Send to send the changed
settings to the camera. To see the current time settings in the
camera, select Options > Get current settings.
Notification settings
The master user can set the camera to send notification text messages
when:
• The battery is low, and the camera shuts down.
• The temperature in the camera premises drops too low or rises too
high for the camera to operate, and the camera shuts down.
• The camera switches on after a power cut.
• The camera switches on after a temperature limit violation.
• There is a power cut, and the back-up battery is in use.
• Motion detection is disabled.
• Timed imaging is disabled.
• Motion detection is on, and the camera is shut down with the power
button.
To set on the notifications, send the following text message to the
camera:
29 1
To set off the notifications, send the following text message to the
camera:
29 0
To check whether the notifications are in use, send the following text
message to the camera:
29 ?
By default, the notifications are in use.
If you are using Remote Camera Manager, select Settings > General
to find this setting.