Nikon D60 User Manual
Page 186
174
Camera Error Messages and Displays
Technical
Notes
—
J/L
(blinks)
• Built-in flash is lowered: raise built-in flash
• Reduce distance to subject, use larger
aperture, or increase ISO sensitivity or flash
range.
• Flash head on optional SB-400 Speedlight
is in bounce-flash position.
• SB-400 is unable to fully illuminate subject
at current lens focal length. Increase
distance to subject (this warning is not
displayed with other optional
Speedlights).
Flash is in TTL mode. Choose
another setting or use a CPU
lens.
J
(blinks)
• Change flash control mode for optional
Speedlight.
• Attach a CPU lens.
No Bulb in S mode.
bulb
(blinks)
Change shutter speed or select mode d.
ww
(blinks)
Unable to measure preset
white balance. Please try
again.
no gd
(blinks)
Camera unable to measure a value for
preset white balance. Adjust exposure
settings and try again.
FOLDER CONTAINS NO
IMAGES.
—
• Insert another memory card.
• Set Playback folder to All.
FILE DOES NOT CONTAIN
IMAGE DATA.
—
• Image files edited on a computer do not
support DCF (The Design Rule for Camera
File Systems) and cannot be played back.
• Image file is damaged.
—
CHECK PRINTER.
—
Insert new ink or toner cartridge in printer. If
error occurs with ink remaining in printer,
check printer status.
Message
Viewfinder
Solution
A