Figure 3-2, Pimmd face layout – NEC NEAX 2000 IPS User Manual
Page 36
NEAX 2000 IPS Configuration Guide
Page 26
NDA-24347, Issue 1
Modules
Chapter 3 Module and Installation Hardware
shows the face layout of the PIMMD.
Figure 3-2 PIMMD Face Layout
Slot 00 - Slot 11
•
Line/Trunk circuit card mounting slots
•
Slot 00 - Slot 07: All Line/Trunk circuit cards can be mounted.
•
Slot 08 - Slot 11: 4-port circuit cards can be mounted only when 8-port cards
are not mounted in the slot 04 to 07.
•
Application circuit card mounting slots
•
Slot 00 - Slot 11: All application circuit cards can be mounted.
•
MP/FP: PN-CP24-A/PN-CP15 mounting slot
•
AC/DC power: PZ-PW121 mounting position
•
DC/DC (-48 V) power: PZ-PW122 mounting position
Note 1:
When the system is comprised of three PIMs or more, FP is required. FP is
mounted in Slot 12 of PIM 2, PIM 4 and PIM 6.
Note 2:
When an 8-port card is mounted in Slot 04-07, Slot 08-11 can only be mounted
with the AP cards.
Note 3:
Only 8PFT card can be mounted in this space. Other cards cannot be
mounted.
Note 4:
It is recommended that the LT00 slot should be used to mount the PZ-VM00-M
(AD-8) card, if provided.
00
01
02
03
04
05
06
07
08
09
10
11
12
8-Port Card Mounted
4-Port Card Mounted
8 8 8 8 8 8 8 8 0 * 0
*
0 *
0*
4 4 4 4 4 4 4 4 4 4 4 4
*Note 2
AC/DC
Power
DC/DC
-48 V
Vacant
Space
AD-8
for
M
P
/
F
P
Note 1
8
P
F
T
Note 3
Number of ports available per slot