Niles Audio RCA-SM - Manual (Page 10)

8
INSTALLATION
(CONTINUED)
STEP 5 – MOUNTING THE CONNECTION HUB
Make sure that your system tested OK before proceeding.
Once you have decided on the ideal location for the connection hub, unplug the 12VDC power
supply from the electrical outlet and disconnect the Microsensor and the MicroFlasher cables from
the connection hub (
Figure 8). The connection hub can be either mounted on a wall using screws
or placed on a shelf using the included adhesive feet ( Figure 9).
Figure 7: Locating IR Microsensor Figure 8: Removing Cables